Downloads
Choose language
Friendly
Our promise
to the future
For us, responsibility for the future is not just a trend, but a way of thinking.
It is a sincere commitment to fulfilling the responsibility we have set ourselves – across all areas of the business. This begins with the conservation of natural resources, extends to fair and cycle-friendly working conditions, and culminates in a closed-loop economy: we source 100 per cent of our energy from hydropower and use the waste heat from production to heat our manufacturing halls.
Why are we doing this?
Because we as a company do not want to be part of the problem, but part of the solution. Because we want to help save energy, conserve resources and generate less electronic waste. And because we want to protect our employees
Durable and solution-focused: our products
Cycling is good for your health, reduces emissions and takes some of the pressure off cities caused by car traffic – more than enough reasons to get on your bike regularly. Our lighting solutions ensure that you’re more visible on the road – especially at dusk and in the dark. As part of our contribution to the much-needed shift towards sustainable transport, we therefore work hard every day to keep you inspired. With products that not only serve their purpose but are also a strong and reliable companion for years to come.
IQ-XS friendly, made from biodegradable plastic
Are you already familiar with our high-quality and durable IQ-XS friendly headlamp, for example? The majority of the plastic casing is made from a biodegradable plastic. This special material contains less than a quarter of fossil-based raw materials and does not release microplastics, even if disposed of incorrectly.
Packaging and material cycles
But we’re thinking even further ahead!
When it comes to packaging, too, we’re committed to material recycling
- We’ve switched our product packaging from plastic blister packs to cardboard.
- We use FSC-certified cardboard for all our boxes. The wood used comes from certified, responsibly managed forests.
- We’ve also switched our outer packaging boxes to FSC-certified cardboard.
- Our filling material is biodegradable.
- Adhesive strips are free from fossil-based solvents.
- Internally, in production and in the warehouse, we use only reusable transport crates.
We are also working on solutions to reduce the use of small plastic bags and – wherever possible – to use alternative materials instead of plastic.
Help us make the world a better place!
We manufacture durable components, but we rely on your help when it comes to separating the materials later on!
Help us by
Always dispose of products and packaging in accordance with the laws and regulations applicable in your municipality.
Dispose of all products containing electronic components (i.e. all headlights and tail lights) in the electronic waste.
Don't throw away old, still-functioning products, but give them a second life by handing them over to a social department stores' or second-hand shop.
Open, inclusive and friendly: our work culture
Busch + Müller actively promotes a work culture in which a wide variety of people with diverse life stories work together successfully. For us, employees are not a resource: it is important to us that the people who support us in our mission are satisfied, motivated and healthy.
That is why we take the wishes and needs of our employees seriously and enable them to work in a way that they feel comfortable with. This starts with occupational health and safety and extends to many other aspects of working together:
Occupational health and safety and working conditions
As a company that produces exclusively in Germany, we ensure that all our employees work under the high standards of occupational health and safety as well as under healthy conditions.
Bicycle friendliness
As a manufacturer of products for bicycles and e-bikes, we are of course also bicycle-friendly. That's why Busch + Müller has a storage room for bicycles including charging facilities for e-bikes. We also offer the option of a company bike. This way, our staff can save money, reduce emissions and do something good for their health at the same time.
Home office and working from home
To reduce travel time and, consequently, CO₂ emissions, we allow our staff to work from home.
Sounds good to you?
Then become part of the teamRegional and responsible - from production to administration
At busch+müller, Made in Germany means: Made in Meinerzhagen. Because we do everything - and by that we really mean everything - at our site in the Sauerland: from research, development, lighting and product design to production, final assembly, marketing and sales, right through to storage, dispatch, service and administration. With comprehensive vertical integration, we not only manufacture our own circuit boards, but also build our own tools.
This has several advantages:
- We can guarantee the optimum quality of our products throughout the entire manufacturing process.
- Thanks to our high level of vertical integration at our Meinerzhagen site, we reduce CO₂ emissions significantly by minimising or completely eliminating transport distances.
- We retain direct control over material flows and processes.
Find out more about how we live "Made in Germany" in Meinerzhagen: Learn more
Use of green electricity
Since 2023, we at busch+müller have been sourcing all of our electricity from hydropower. This enables us to save more than 850 tonnes of CO2 every year while promoting the expansion of renewable energies.
Waste management
Our entire busch+müller team is aware of the importance of conserving resources in terms of materials and consumption. We minimise waste and separate it carefully.
Natural air conditioning
For cooling, we rely on a simple ventilation system that uses natural air flow. We don't use energy-intensive air conditioning in either our production or administrative facilities.
Supporting the natural groundwater cycle
With the help of an infiltration system, we feed around 60% of the precipitation on the sealed company building directly into the natural groundwater cycle. This reduces the load on the municipal sewage treatment plant and the public sewer system.
LED lighting in our new building
The new part of our building has full LED lighting, which is controlled by a system of motion detectors and timers to save energy. All light bulbs in the old building have also been replaced with LEDs.
Insulation in our new building
Our company building, constructed in 2016, was built according to the latest standards in construction technology and thermal insulation. Only recyclable, high-quality materials were used to ensure the longest possible service life.
Our older building was also fully refurbished in 2020 to improve its energy efficiency, using recyclable and durable building materials.
Utilisation of heat loss
To melt the plastic granulate, our injection moulding machines convert electrical energy into heat. We use the resulting lost heat to heat our premises, saving around 25% in primary energy each year.
Use of biological oil
In our lift system, we use a rapidly biodegradable, plant-based hydraulic oil as the hydraulic fluid.
Used oil reduction thanks to oil filters
We continuously check the hydraulic oil used in the injection moulding machines for contaminants. If there are any deviations, we filter the oil and can then reuse it. As a result, we produce very low levels of used oil.
Sustainable galvanisation
We operate our own galvanising plant at our site and produce this form of surface coating in accordance with European and German specifications. In this way, we ensure that our electroplating processes are always state-of-the-art, comply with health and safety standards, and meet the most stringent emission and effluent regulations. We treat the wastewater from the galvanising process in a modern ion exchange plant, enabling us to discharge it safely into the sewage system.
Circular economy in plastic injection moulding
Plastic injection moulding always produces a certain amount of waste during production. We grind these plastic parts into granulate and return them to the production process.
Checked, tested, confirmed: Our awards and certificates
Our products and processes meet the highest standards of quality and sustainability.
Anyone can claim that, of course. That's why we prove it - with corresponding certificates and awards. As a customer, you can quickly and easily see for yourself that we at Busch + Müller actually keep our promises. And it serves as an incentive for us to not only maintain our standards, but to constantly improve them.
Our awards and certifications at a glance:
DIN EN ISO 9001
We have been fulfilling the DIN EN ISO 9001 standard for quality management since 1997. This is official proof of the effectiveness of our processes in terms of improving customer satisfaction, optimising processes within the company, increasing efficiency and reducing costs, as well as the systematic handling of company knowledge.
DIN EN ISO 14001
All Busch + Müller products as well as all company processes fulfil at least the requirements of the EN ISO 14001 standard, which is checked (audited) and officially certified annually by an independent testing institute. In addition, Busch + Müller has installed an environmental management system that goes far beyond the requirements of the standard, whereby the control of sustainability is also extended to suppliers.
GREEN AWARD
In 2009, Busch + Müller was honoured with the Eurobike Green Award for the E-WERK. This award recognises special products and ideas that take sustainability and environmental protection to a new level in the bicycle market. The jury's statement: "The E-WERK is an appealing idea - generating electricity while riding. This makes you completely independent of the power grid, even in remote areas." By 2025, only eight Green Awards had been presented by the critical jury!
VSF product certification
In 2021 we were certified by the VSF. Verbund Service und Fahrrad (VSF) is an independent trade association for the bicycle industry that represents more than 300 dealers, manufacturers and service providers. It stands for high quality standards, sustainability, fairness and reliability. The VSF has installed a system that involves experts from various fields with many years of professional background in the analysis. The result is reliable product recommendations and high-performance items with maximum functionality and durability, ideally manufactured in a particularly sustainable way and under fair social conditions.
Taking a forward-looking approach to responsibility: Our commitment to the environment, people and society
For this reason, we have been involved in professional initiatives and social projects for many years – to achieve a measurable impact and a future worth living.
"Aktion Mensch"
busch+müller has been supporting "Aktion Mensch" since 2011. The organisation supports projects that help to improve the living conditions of people with disabilities, children and young people.
Social institutions in the region
We support numerous regional organisations that are involved in a wide range of areas - from environmental protection, sport and schools to social and church projects.